CAR BATTERY CHARGER
ULGD 5 .0 A1
Introduction
We congratulate you on the purchase of your new
device . You have chosen a high quality product .
The instructions for use are part of the product .
They contain important information concerning
safety, use and disposal . Before using the product,
please familiarise yourself with all of the safety
information and instructions for use . Only use the
unit as described and for the specified applica-
tions . If you pass the product on to anyone else,
please ensure that you also pass on all the docu-
mentation with it .
Intended use
The Ultimate Speed ULGD 5 .0 A1 is a multi-stage
car battery charger that is suitable for charging
and trickle charging up of 6 V or 12 V lead-acid
batteries (batteries) with electrolyte solution (WET),
electrolyte absorbent mats (AGM) or gel electrolyte
(GEL) .
This appliance is not suitable for charging lithium-ion
batteries . The is not intended for commercial use
and is for indoor use only .
The manufacturer accepts no responsibility for
damage(s) arising out of usage contrary to the
instructions specified below .
Scope of delivery
1 Car battery charger
1 Instructions for use
■
32
│
GB │ MT
Parts description
See Figure A
12 V/0 .8 A (Program 2)
12 V/5 .0 A (Program 3)
12 V/5 .0 A (Program 4)
6 V/0 .8 A (Program 1)
LED reverse connection
LED stand-by
Charge display
Condition display
Voltage display
Program selection button (►►►)
See Figure B
Charger
Stands
Mains lead
Positive pole clamp (red)
Negative pole clamp (black)
Positive pole connector cable (red)
Negative pole connector cable (black)
Technical Data
Rated voltage
Rated power consumption 0 .8 A
Rated output DC voltage
Rated output DC
Fuse (internal)
Environmental
temperature
Protection rating
Protection class
Battery types
220–240 V ∼, 50 Hz
(alternating current)
6 V
/ 12 V
(direct current)
0 .8 A / 5 .0 A
2 A
T2A
-20°C to 50°C
IP 65
II /
(double shielded)
6 V lead acid battery
1 .2 Ah–14 Ah
12 V Lead acid battery
1 .2 Ah–120 Ah
ULGD 5.0 A1