Publicidad
- After charging, disconnect the external adapter from electrical outlet and remove the light from the
station.
NOTE:
- Keeping the light power on when charging will extend the charging leadtime. Make sure to power
off the light before charging.
Power the Light On/Off
To power on the light, you can either press and hold the button on the bottom of Pool and Patio
light / "ON/OFF" button on Illuminated Furniture for 2 seconds OR press the "ON" button on the
remote control.
Once the power is on, the light will be in color scrolling mode and gradually changes through all
combinations of colors.
To power off the light, you can either press and hold the button on the bottom of Pool and Patio
light / "ON/OFF" button on Illuminated Furniture for 2 seconds, OR press the "OFF" button on the
remote control.
Mode selection by Remote Control
NOTE: First remove the small plastic sheet from the battery cover before below operation.
Select color scrolling mode
Once the power is on, the light will illuminate and gradually change through all combinations of
colors.
To change to this mode while another mode is in operation, just press the "PLAY/PAUSE" button
on remote control.
While the color is scrolling, you can press button "PLAY/PAUSE" to hold your favourite color.
For adjustment of light intensity and scrolling speed, refer to following instruction.
Select the individual color mode and flashing mode
After power on, the light will start in color scrolling mode. Press the button "COLOR" on the remote
control to select 7 individual colors. Pressing the 8th time, it will go to the color flashing mode to
display all seven colors one by one automatically. Pressing the 9th time, it will return to the color
individual mode.
For adjustment of light intensity and flashing speed, refer to following instruction.
Publicidad
