Effect Change - Schubert Preludio Manual Del Usuario

EFFECT CHANGE

Timbre change
Sustain
•
This function prolonges the lasting time of a pitch.
1. Press the [FUNCTION] button (4) and the [SUSTAIN - ON] key (15, black)
to enable the sustain effect.
2. Press the [FUNCTION] button (4) and the [SUSTAIN - OFF] key (15, white)
to disable the sustain effect.
Vibrato
•
This function adds a pulsating change to the pitch.
1. Press the [FUNCTION] button(4) and the [VIBRATO - ON] key (16, black)
to enable the vibrato effect.
2. Press the [FUNCTION] button (4) and the [VIBRATO - OFF] key (16, white)
to disable the vibrato effect.
Pedals (- not included in delivery!)
NOTE: The following pedal functions are only available if a pedal with
corresponding functions is purchased and connected to the keyboard.
Soft pedal: decreases the pitch volume.
•
Press and hold the soft pedal to enable the soft effect, and release the
pedal to disable such effect.
Note: This function is only supported if an additional pedal part with
3 pedals is connected.
EN
31