General; General Terms Of Delivery; Voltage; Water Treatment - PSA ZODIAC Uranus+ Manual De Instalación Y De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35

1. GENERAL

1.1 General terms of delivery

Any equipment, even CARRIAGE and PACKING FREE, travels at the consignee's risk. The consignee
shall make reserves in writing on the carrier's delivery bill if he notes damage caused during the
transport (confirmation to be sent to the carrier within 48 hours by registered mail and Acknowledgement
of Receipt).

1.2 Voltage

Prior to any operation, check that the voltage on the identification plate of the appliance corresponds to
the mains voltage provided on site.

1.3 Water treatment

In order to use our appliances in the best conditions, swimming pool water shall comply with the
following values: free chlorine: maximum 2.5 mg/L, total bromine: maximum 5.5 mg/L, pH between 6.9
and 8.0. For any other treatment, the fitter and the user shall apply to the supplier of the planned
disinfection process (chemical, electrochemical or electrophysical) for the compatibility with the materials
of our appliances. In any case, treatment shall be installed downstream the heating equipment.

2. DESCRIPTION

2.1 Presentation

+
*UP
35-70 are fitted with circulating pumps : UPS 25/60 - length 130 mm - consumed power 70W (speed 3) - In
(A) 0,30 (speed 3) - capacitor: 2.5 µF 400V
+
UP
120-240 are fitted with circulating pumps : UPS 32/80 - length 180 mm - consumed power 240W (speed 3) -
In (A) 1,05 (speed 3) - capacitor: 5 µF 400V
1- electric box
2- body
3- end plate
4- connection flange
5- flow switch
6- connection socket
7- control sensor
8- thermowell
9- primary connection (to be welded)
10- nipple 26/34 or 33/42
11- valve
12- union fitting of circulating pump 1 1/2" or 2"
13- circulating pump*
14- elbow
15- check valve
16- tee
17- adaptation nut for drain valve
18- drain valve
19- pre-bored stopper PVC 20/27
20- flat joint 20/27
+
UP
35 => 15 plates – T2 titanium – 0.5 mm
+
UP
70 => 25 plates – T2 titanium – 0.5 mm
+
UP
120 => 17 plates – M3 titanium – 0.4 mm
+
UP
240 => 31 plates – M3 titanium – 0.4 mm
2

Publicidad

Tabla de contenido
loading

Tabla de contenido