Ryobi OHT1851 Manual De Utilización página 18

EN
FR DE ES IT PT
SPECIFICATIONS
Product Specifications
OHT1851
Model
18V
Voltage
1200 min -1
No Load Speed
500 mm
Blade Length
16 mm
Cutting Capacity
Measured sound
L =71dB(A), K
PA
pressure level
Measured sound
L =91dB(A), K
WA
power level
ah= 1.0m/s
Vibration
Weight with
3 kg
Battery Pack
Not included
Battery Pack
BPP-1817M / BPP-1815M /
BPP-1817MG / ABP1801 /
Compatible
ABP1802 / BPL-1815 /
Battery Packs
BPL-1820 / BPL-1820G
Not included
Charger
BC-1800 / BC-1800M / BC-
1815S / BC-1815SMG / ACR-
Compatible Charger
1800 / BCL-1800 / BCL-1800G
/ BCL1418
FEATURES
FIG. 1
1. Blade Cover
2. Guard
3. Front Handle
4. Trigger Lock Button
5. Rear Handle
6. Battery Pack
7. Blade
8. Sensor Switch
9. Front Handle Switch
11. HedgeSweep™ debris sweeper (sold separately)
FIG. 2
6. Battery Pack
10. Latches
960737014-02.indd 15 960737014-02.indd 15
NL SV DA NO FI HU CS RU
English
FIG. 3
2. Guard
3. Front Handle
4. Trigger Lock Button
RHT1850Li
9. Front Handle Switch
FIG. 7
12. Cutter Blade
13. Guard Blade
FIG. 8
1. Blade Cover
FIG. 9
=3dB(A)
PA
11. HedgeSweep™ debris sweeper (sold separately)
=3dB(A)
OPERATION
WA
INSTALL BATTERY PACK
2 , K=1.5 m/s 2
■
1 x BPL-1815
■
REMOVE BATTERY PACK
■
1 x BCL-1800
or
1 x BCL1418
■
When placing battery pack in your string trimmer, be
sure raised rib on battery pack aligns with groove in
string trimmer and latches snap in place properly.
Improper assembly of battery pack can cause damage
to internal components.
STARTING THE HEDGE TRIMMER
■
■
■
STOPPING THE HEDGE TRIMMER
■
■
15
RO PL SL HR ET
Place the battery pack in the string trimmer.
Align raised rib on battery pack with groove in string
trimmer. See Figure 2.
Make sure the latches on the battery pack snap
in place and that battery pack is secured in string
trimmer before beginning operation.
Locate latches of battery pack and depress both
sides to release the battery pack from the string
trimmer. See Figure 2.
Remove battery pack from the string trimmer.
CAUTION
Remove the blade cover.
For added safety, there is a sensor switch in the
upper handle. See Fig. 3. When operating, hold the
trimmer with both hands, one hand to push the trigger
lock button forward, and the other hand to squeeze
the front handle.
Release the trigger lock button and continue to
squeeze the trigger for extended operation.
Release the trigger to stop the hedge trimmer.
Upon release of the trigger, the trigger lock button will
be automatically reset to the lock position.
LT LV SK BG
2011/1/26 2011/1/26 10:24 10:24