KRATOS SAFETY S-TOOLS SYSTEMS TS 90 001 00 Instrucciones página 8

Idiomas disponibles

2) Select the connection (tool lanyard) :

The lanyard connection must be selected based on the weight of the tool, the attachment on the tool, (see § 1), and based on the

length necessary for use.

•

Using lanyards TS 90 001 00, TS 90 001 02, TS 90 001 03:

Always properly tie the knot made using the stopper on the cord.

•

Using lanyard TS 90 001 06:

Connect a connector directly to the attachment point on the tool.

Maximum tool load for lanyards TS 90 001 00 + TS 90 001 06 : 5 kg.

Maximum tool load for lanyard TS 90 001 02 : 2 x 5 kg.

Maximum tool load for lanyard TS 90 001 03 : 2 kg.

•

Using lanyard TS 90 001 01:

Make a lanyard hitch knot around the tool, making sure to attach the lanyard opposite the tool's natural centre of gravity.

The round metal ring on the tool-carrying lanyard TS 90 001 01 can be used to attach a tool on a fixed

connector attached on the user when the tool is not used.

Maximum tool load for lanyard TS 90 001 01 : 10 kg.

3) Choosing the anchor point :

•

This may be a tool attachment ring on the user's belt, harness, etc.