Publicidad
Step 18
Apply the WARNING LABEL (1L) to the TOP (E). You should be able
å
to read the label when the TV is removed from the unit. When the TV
is in place, it should hide the label. Peel off the backing and apply the
label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the
å
product. Once applied, do not try to remove it.
Center a SCREW COVER (20P) over the head of each SCREW and
å
gently tap in with your hammer.
Using your hammer, gently tap a CAM COVER (12P) onto each
å
HIDDEN CAM.
NOTE: Please read the back pages of the instruction booklet for
å
important safety information.
This completes assembly. Clean with your favorite furniture polish or
å
a damp cloth. Wipe dry.
12P
(8 used)
To cover HIDDEN CAMS
Page 22
50 lbs.
30 lbs. total
50 lbs. total
(6 used)
20P
To cover screws
1L
E
423410
Center Door opening right
WARNING
Never use this furniture with a TV
that is too large or too heavy. Severe
injury or death can occur. The TV and
furniture will be unstable and may tip.
-The TV must weigh less than 50 lbs.
-The base of the TV must be able to
sit completely on this shelf.
Refer to instruction book for
complete safety information.
Note: This is a permanent label. Do
not try to remove. Surface will be
damaged.
08/05
2 6 9 2 2 0
www.sauder.com/service
269220
Publicidad
