en
Maintenance
The gas detector can be switched on again in the
charging cradle and is then supplied with electrical
current during operation.
WARNING
No measurement!
If there is an external power supply voltage drop > 1 s
in the charging cradle while the gas detector is in
operation, the gas detector switches off.
► Ensure uninterrupted power supply (does not apply
if the optional setting, that the gas detector does not
automatically turn off in the charging cradle, is
selected). If this cannot be ensured, regularly check
that the gas detector is turned on (e.g. based on the
optical and acoustic operating signals).
Designation and
description
Inductive charging cradle
for charging 1 gas detec-
tor
Adapter for the plug-in
power supply unit
Plug-in power supply unit
for charging 1 gas detec-
tor
Plug-in power supply unit
for charging 5 gas detec-
tors
Plug-in power supply unit
100-240 V AC; 1.33 A for
charging up to 5 gas
detectors
(requires adapter
83 25 736)
Plug-in power supply unit
100-240 V AC; 6.25 A for
charging up to 20 gas
detectors
(requires adapter
83 25 736)
Vehicle connection
12 V / 24 V for charging
1 gas detector
Vehicle connection 12
V / 24 V for charging up to
5 gas detectors
(requires adapter
83 25 736)
Designation and
description
Vehicle mount
(requires adapter
83 25 736 and vehicle
connection cable
83 21 855)
5.7 Cleaning
The gas detector does not require any special care.
If it is heavily soiled, wash the gas detector with cold
water and use a sponge if necessary. Use a cloth to dry
the gas detector.
NOTICE
Damage to the gas detector!
Order no.
Rough cleaning objects (e.g. brushes), cleaning agents
and solvent may destroy the dust and water filter.
83 25 825
► Only clean the gas detector with cold water and, if
83 25 736
The shoulder strap can be cleaned with water and
without cleaning agents in a wash bag in an (industrial)
83 16 997
washing machine.
83 16 994
83 21 849
83 21 850
45 30 057
83 21 855
necessary, with a sponge.
Order no.
83 27 636
®
X-am
8000