Main Unit; Rear Panel; Lcd Display - Akiyama CDJ-MP32 Manual De Instrucciones

PART NAMES AND FUNCTIONS

MAIN UNIT

21. DRIVE 2 TRANSPORT TRAY - This tray is used to load and unload a
compact disc into the drive 2 mechanism. The tray is opened and closed by
pressing the DRIVE 2 OPEN/CLOSE BUTTON. Never attempt to force the
transport tray open or closed when the power is turned off.
22. DRIVE 2 OPEN/CLOSE (Transport Tray Open/Close) - This button is
used to open and close the drive 2 transport tray. NOTE: When a disc is already
loaded in the transport tray, the tray will not open unless the unit is in pause or
cue mode.
23. DRIVE 1 TRANSPORT TRAY - This tray is used to load and unload a
compact disc into the drive 1 mechanism. The tray is opened and closed by

REAR PANEL

- Connect the supplied 8 pin cable from this jack to
26. REMOTE JACK
the remote control's connector. This will allow you to control the player
functions with the remote unit.
27. POWER CONNECTOR - This is the main power connection. Only
use the supplied polarized power cord. Use of any other power may result
in sever damage to the unit. Be sure the local power matches the unit's
required power.
28. DRIVE 1 DIGITALOUT - This jack sends a digital stereo out signal.
Use this connection to create near perfect copies of your disc to a Mini
disc, CD-R, or any other recording device with a digital input.
29. DRIVE 1 AUDIO OUT R & L

LCD DISPLAY

(32)-(35)Track, Minute, Second and Frame Displays
indicate information for the CD's current position and time.
(36)BAR Indicator - These ten indicators provide a visual display of the
approximate position of the pickup within the current track.
(37)SINGLE Indicator - This indicates the unit is in single play mode,
the unit will play a single and return to CUE mode. If the single indicator
isn't displayed the unit is in continuous mode. In continuous mode the
drive will play through all the tracks on the disc.
All manuals and user guides at all-guides.com
30
31
– These jacks send a left and right
- These displays
c d j - m p 3 2
pressing the DRIVE 1 OPEN/CLOSE BUTTON. Never attempt to force the
transport tray open or closed when the power is turned off.
24. DRIVE 1 OPEN/CLOSE
used to open and close the drive 1 transport tray. NOTE: When a disc is already
loaded in the transport tray, the tray will not open unless the unit is in pause or
cue mode.
25. POWER SWITCH - This switch is used to control the unit's main power.
A red LED directly above the power switch will glow to indicate main power
is active.
26
27
analog mono output signal. Use these jacks to send standard audio to a
mixer or receiver. The red colored jack represents the right channel output
and white jack represents the left channels output.
30. DRIVE 2 DIGITALOUT
Use this connection to create near perfect copies of your disc to a Mini
disc, CD-R, or any other recording device with a digital input.
31. DRIVE 2 AUDIO OUT R & L
analog mono output signal. Use these jacks to send standard audio to a
mixer or receiver. The red colored jack represents the right channel output
and white jack represents the left channels output.
(38)TOTAL REMAIN Indicator
to the time meter. When the total remain indicator is displayed in the
LCD, the time defined will refer to a disc's total remaining time. The time
mode is changed by tapping on time button.
(39)REMAIN Indicator - Indicates that the time shown on the display is
the remaining time of playing track.
(40)PITCH DISPLAY - It shows the BPM change range, the BPM
changes within a range of +/-4%,+/- 8%,+/-16%.
(Transport Tray Open/Close) –This button is
29 28
- This jack sends a digital stereo out signal.
- These jacks send a left and right
- This indicator is in direct reference
3