Danby Silhouette DKC646BLS Manual Del Propietário
  1. Manuales
  2. Marcas
  3. Danby Manuales
  4. Enfriadores
  5. Silhouette DKC646BLS
  6. Manual del propietário
Danby Silhouette DKC646BLS Manual Del Propietário

Danby Silhouette DKC646BLS Manual Del Propietário

Barril refrigerador
Ocultar thumbs
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
OWNER'S MANUAL
GUIDE D'UTILISATION
MANUAL DEL
PROPIETARIO
Model
Modèle
Modelo
•
•
DKC646BLS
CAUTION:
Read and follow all safety rules
and operating instructions
before first use of this product.
PRÉCAUTION :
Veuillez lire attentivement les
consignes de sécurité et les
instructions d'utilisation avant
l'utilisation initiale de ce
produit.
PRECAUCIÓN:
Lea y observe todas las
reglas de seguridad y las
instrucciones de operación
antes de usar este producto
por primera vez.
?
R
Keg Cooler
Owners Manual
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . 3
Glacière de bière pression
Guide d'utilisation
Table des matières . . . . . . . . . . . . . . . . . . . . . ..23
Barril Refrigerador
Manual del propietario
Tabla de Contenido . . . . . . . . . . . . . . . . . . . . . . . . . ..43
Danby Products Limited, Guelph, Ontario Canada N1H 6Z9
Danby Products Inc., Findlay, Ohio USA 45840
draft.1.03.07

Publicidad

Tabla de contenido
loading

Manuales relacionados para Danby Silhouette DKC646BLS

Resumen de contenidos para Danby Silhouette DKC646BLS

  • Página 1 Tabla de Contenido ......43 Danby Products Limited, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc., Findlay, Ohio USA 45840...

  • Página 2: Need Help

    WELCOME Welcome to the You’ll see it in this Best of all, you’ll Danby family. We’re easy-to-use manual experience these proud of our quality and you’ll hear it in values each time you products and we the friendly voices of use your Keg Cooler.

  • Página 3: Tabla De Contenido

    TABLE OF CONTENTS Important Safety Information Grounding Instructions Warning C0 Can be Dangerous! Safety Precautions Don’t Wait Do This Now! Important Notice Features Knowing your Keg Cooler Accessories Capacity Setting Up Your Keg Cooler Before putting your appliance into use Disposal of Packaging Location Outdoor Instructions...

  • Página 4: Important Safety Information

    IMPORTANT SAFETY INFORMATION READ ALL SAFETY INFORMATION BEFORE USING GROUNDING • This appliance must be grounded. In the event of a INSTRUCTIONS malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

  • Página 5: Safety Precautions

    ( see ‘Optional Accessories’ on pg 7 ). Danby does not assume liability for the unlawful use or consumption of the beer. PLEASE DRINK RESPONSIBLY AND PLEASE DON'T...

  • Página 6: Features

    FEATURES KNOWING YOUR KEG COOLER 1 Black 4 Worktop & 7 Intake/Exhaust Dispense Tower Chrome Rail (for condenser fan) 8 Swivel Castors 2 Dispenser 5 Electronic Faucet & Handle Controls/Display 3 Plastic Drip Tray 6 Stainless Steel Door...

  • Página 7: Included Accessories

    1 CO 2 Air line hose plug missing and /or not in good 1 Beer Keg Coupler condition, please call Danby 1 Beer Tower Unit (incl. faucet, hose, nut and rubber washer) TOLL FREE at the number 4 Machine Screws (to attach to beer tower)

  • Página 8: Capacity

    FEATURES There are three (3) standard size beer kegs that can be KEG SIZES used in your Keg Cooler; 1/2 Barrel: 58.5 Liter Keg (15.5 Gal) Yields: 7 cases (1984ozs) of beer Keg Weight: 170lbs Full (approx.) 1/4 Barrel: 30 Liter Keg (7.75 Gal) Yields: 3-1/2 cases (992ozs) of beer Keg Weight: 85lbs Full (approx.)

  • Página 9: Setting Up Your Keg Cooler

    SETTING UP YOUR KEG COOLER Before putting the appliance into use... IMPORTANT: • Ensure that all included If the appliance has recently been transported or tipped, before accessories are present and in connecting the appliance to any electrical power supply , leave it good condition ( see ‘Included standing (upright) for about 1 hour.

  • Página 10: Assembly Instructions

    SETTING UP YOUR KEG COOLER ASSEMBLY INSTRUCTIONS 1. Installation of the Top Rail: See Fig. 1. 2. Installation of CO2 Regulator: Attach the CO2 Regulator to the CO2 cylinder by screwing the regulator nut onto cylinder valve and tighten (snug) using an adjustable wrench. See Fig.
  • Página 11 SETTING UP YOUR KEG COOLER ASSEMBLY INSTRUCTIONS (CONT’D) 5. Installation of C0 Air Line Hose to Regulator: 9. Installation of the Keg Coupler: IMPORTANT NOTICE; Make sure the pull handle of the Attach one end of the (red) air line hose to the keg coupler is in the "upward"...
  • Página 12 SETTING UP YOUR KEG COOLER ASSEMBLY INSTRUCTIONS (CONT’D) 13. Making the connection between the Keg IMPORTANT: The internal operating pressure of the Coupler and Beer Keg: Before making (opening) beer keg should be adjusted and maintained between connection between the keg coupler and beer keg, 10 ~ 12psi/lbs.

  • Página 13: Changing The Direction Of The Door Swing

    SETTING UP YOUR KEG COOLER IMPORTANT NOTICE: Before proceeding with the configuration Changing Direction options on this page, remove keg and the CO cylinder (if installed) of the Door “Swing” from the Keg Cooler. Once complete, allow the unit to stand upright for 1 hour before putting the unit into operation.

  • Página 14: Electronic Controls

    OPERATING INSTRUCTIONS Electronic Controls Adjusting the temperature; • Press either button once and release to enter the ‘SET’ mode. The LED display will begin to flash and show the previous temperature TEMPERATURE INCREASE setting - signifying the temperature is ready to be adjusted.

  • Página 15: Replace An Empty Co 2 Cylinder

    OPERATING INSTRUCTIONS Replace an Empty Cylinder 1. Close the main cylinder valve (A) by turning in a 9. Readjust regulator pressure (D) (if necessary) clockwise direction. See Fig.12 between 10 ~ 12 psi/lbs. 2. Close the secondary shut-off valve (C) by 10.

  • Página 16: Using Proper Draw Technique

    OPERATING INSTRUCTIONS Using Proper Draw 1. Rinse a “Beer Clean” glass under cold water. Technique 2. Place glass beneath tap, and tilt at a 45 angle. (as shown in Fig. 13) Leaving approximately 1/4” between glass and faucet. 3. Fully draw the dispenser handle and fill the glass to 2/3 Using the proper draw full.

  • Página 17: Cleaning And Maintenance

    A standard cleaning kit will perform approximately eight (8) scheduled line cleanings. Line cleaning kits are readily available and can be purchased through our after sales service department. For more information please call 1-800 26-DANBY (1-800-263-2629)

  • Página 18: Glassware, Co 2 Pressure, Beer Keg

    CLEANING AND MAINTENANCE..of the “Beer • Maintain strict sanitary conditions in the glass washing area. Clean” Glassware • Never wash glassware with utensils or dishes used to serve food. Food particles and/or residue can effect the quality/taste of draught beer. •...

  • Página 19: Before You Call For Service

    BEFORE YOU CALL FOR SERVICE TROUBLESHOOTING Problem Possible Causes What To Do Excess formation of Recent keg agitation If the keg has recently been moved (transported), you should let it stand for a minimum of two (2) hours foam ‘head’. before tapping.
  • Página 20 BEFORE YOU CALL FOR SERVICE TROUBLESHOOTING (Cont’d) Problem Possible Causes What To Do Dispense system See “Cleaning and Maintenance” on pg. 17-18 Sputtering draw requires cleaning. Keg Coupler installed Check seal between keg & faucet incorrectly Verify that there are no ‘kinks’ or obstructions in either Line or dispenser the air line (red) or dispenser line (clear) and that obstructions.

  • Página 21: Warranty

    This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer. This warranty is available only to the person to whom the unit was originally sold by Danby or by an authorized distributor of Danby, and is non-transferable. TERMS OF WARRANTY Plastic parts (ie.
  • Página 22 • Tipo de artefacto • Número de modelo • Descripción del repuesto Danby Products Limited, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc., Findlay, Ohio USA 45840 Printed in China (P.R.C.) Imprimé en Chine (R.P.C.)

Tabla de contenido