Table For Cv - marklin 20755 Manual Del Usuario

Register Assignment
1 Address
2 Minimum speed
3 Acceleration delay
4 Braking delay
5 Maximum speed
8 Reset
13 Function F1 – F8 with alternative track signal
14 Function FL, F9 – F15 with alternative track signal
17 Expanded address, higher value byte
18 Expanded address, lower value byte
19 Multiple unit operation address
21 Functions F1 – F8 with multiple unit operation
22 Function FL, F9 – F15 with multiple unit operation
Bit 0: Direction normal/inverted
Bit 1: Number of speed levels 14/28(128)
29
Bit 2: Analog operation off/on
Bit 5: short / long address active
Alternative Formats
50 Bit 1: Analog DC
Bit 3: mfx off/on
53 Motor control – control reference
54 Motor control – control parameter K
55 Motor control – control parameter I
56 Motor control – control influence
Range Default Register Assignment
1 – 127 3
0 – 255 20
60
0 – 255 5
0 – 255 5
63
0 – 255 255
64
8 131
67 – 94 Speed table for speed levels 1 – 28
0 – 255 2
112
0 – 255 1
113
192 – 231 192
114
0 – 255 128
115 – 135
0 – 255 0
137
0 – 255 0
138
0 – 255 0
139 – 155 Volume for individual sounds
0/1
176
0/2
6
0/4
177
0/32
257 – 260 Function mapping Function FL forwards
0/2
10
0/8
262 – 265 Function mapping Function F1 forwards
0 – 255 240
267 – 270 Function mapping Function F2 forwards
0 – 255 32
272 – 275 Function mapping Function F3 forwards
0 – 255 16
277 – 280 Function mapping Function F4 forwards
0 – 255 42
282 – 285 Function mapping Function F5 forwards
287 – 290 Function mapping Function F6 forwards
14
Multi-station announcement
Bit 0 – 3: Number of stations
Bit 4: Last announcement changes the sequence
Bit 5: Locomotive direction changes the sequence
Bit 6: Start for the sequence
Total volume
Threshhold for squealing brakes
Mapping lights in the front, mode
Mapping lights in the front, dimmer
Mapping lights in the front, cycle
Mapping phys. outputs, lights in the rear, Aux 1 – 6,
compare 112 – 114
Factor for switching range
Volume for squealing brakes
Minimum speed in analog DC
Maximum speed in analog DC
Range Default
0 – 15
0/16 0
0/32
0/64
0 – 255 255
0 – 255 55
0 – 255
0 – 16 1
0 – 255 255
0 – 255 20
0 – 16
0 – 255
1 – 128
0 – 255 255
0 – 255 255
0 – 255 15
0 – 255 255
0 – 255 257 = 1
0 – 255 263 = 16
0 – 255 268 = 8
0 – 255 274 = 64
0 – 255 278 = 1
0 – 255 283 = 32
0 – 255 289 = 16