Features Of The Product - Omron Micro Air Manual De Instrucciones

Safety Information
General Advice
Replace the worn batteries with new ones immediately.
Do not use different types of batteries together.
Do not use new and worn batteries together.
Do not use dry batteries and rechargeable batteries together.
Be careful not to insert batteries in the wrong way so that unit operates correctly.
You can use commercially available rechargeable NiMH batteries, but do not use
nickel cadmium batteries.
Charge the rechargeable batteries with a commercially available charger.
(The AC Adapter enclosed in the package cannot be used as a battery charger.)
Wash Medication Bottle, Mesh Cap, and Vibrator with clean tap water or commercially
available distilled water.
Wash Medication Bottle, Mesh Cap, and Vibrator with clean tap water or the commercially
available distilled water.
When rinsing Medication bottle under the tap, use gentle pressure, not strong running tap water.
Assemble the cleaned and disinfected parts after sufficiently drying them.
Do not use benzene, thinner, or gasoline to clean the unit.
Do not dry Main Unit, AC Adapter, Medication Bottle, and Mesh Cap in a microwave oven
or boil them to clean..
Do not store the unit under high temperature and high humidity, or under direct sunshine.
Do not leave or carry the Medication Bottle Unit filled with medication or water.
Remove batteries from the unit when you are not going to use the unit for a long period
(approximately three months or more).
4

Features of the Product

1
Pocket-sized unit can be easily carried anywhere you go
The unit is small enough to be placed in a carrying / storage case or purse, you can
easily carry it around wherever you go. The new titanium alloy mesh creates
a high efficiency aerosol.
2
Inhalation is possible at various angles
The new bottle structure enables inhalation at various angles with stable nebulization.
Therefore, the unit can be used even at bedside.
3
Simple care and easy use
The unit does not need any complex care. Just like the traditional compressor type
nebulizer, all you have to do is to remove the medication after inhalation and dry
the bottle immediately after washing it.
To start inhalation, you must assemble the unit.
Before starting to use the unit, please read the section on "How to
Assemble the Main Unit" and understand the points for assembling.
(Refer to Pages 8 and 9)
(This is an image of the unit using an Inhalation Mask.)
5