BATTILE PRO can be used for indoor and outdoor installation.
It replaces the traditional manual operation and helps to avoid
problems due to the incorrect distribution of the adhesive under
tiles and big slabs. The main features are: extreme usefullness,
safety, respect for the environment and easy use.
1- Suction Pad
2 - Sub-Handle
3 - Lithium Battery
4 - ON / OFF main switch
5 - Suction Pad
6 - ON / OFF vibration
TECHNICAL DATA
Battery Capacity: 16V LI-ion - 2,0 AH – 32 WH
Charging current: 1 A
Charging time: 2,5 H
Vibration frequency: 5000 ÷ 12000 rpm
Suction power: 25 kg
NOTE
• The machine must be stored in a dry place.
• Remove any dirt or dust from the machine after use.
• Store BATTILE PRO in its carry-case to avoid damage.
• It's recommended to recharge the BATTILE PRO daily, for
frequent use. It is also suggested to recharge it, at least, once
a month if not used for long periods.
INSTRUCTIONS
A) Assembly the battery pack
B) Hold down the on/off button to switch ON the machine.
C) Press shortly the on/off button to adjust vibration:
- level 1: Red (Min.)
- level 2: Red and Yellow (Med.)
- level 3: Red, Yellow and Green (Max.)
D) At level 3, hold down on/off button to switch OFF the machine.
E) Red light on/off flashing, means battery is at low level, re-
charge the battery.
IMPORTANT NOTICE: THIS BATTERY PACK IS NOT WATER
PROOF. MALFUNCTION CAUSED BY USE WITH WATER, IT'S
OUT OF WARRANTY.
OPERATING PROCESS
• Place the machine on the tile surface, lock the suction lever
forwards, (see Pic 7), lift the tile and move it to the working
area. (see Pic 8).
• Suction lever forwards, turn "Battile Pro" in "Suction mode"
with this set up , the tiler can lift the tile and once it has been
layed, vibrate it (see Pic 9).
• Suction lever backwards (see Pic 7), turn "Battile Pro" in
"hammer working mode" with this set up, the tiler can vi-
brate the tile, sliding the machine on it.
• Facing heavy slabs or large format tiles we suggest to use
a frame device ( like Montolit 300-70SL-MOB ) to lift it, then
once layed the tiler is free to vibrate the tile sliding the ma-
chine on it.
• When the tile/slab is placed in position turn the "BATTILE
Pro" on and slide it over the surface of the slab using a
"rotatory movement" to facilitate the outflow of the air un-
der the tile in order to obtain the correct distribution of the
adhesive (see Pic 10).
ENGLISH
USE AND MAINTENANCE MANUAL
2
2
3
5
WARRANTY
2 (TWO) years from date of sale (delivery note/receipt or in-
voice). Any malfunctions caused by inappropriate or incorrect
use of the machine will not be covered under the warranty.
Brevetti MONTOLIT has always employed and supplied top
quality materials and products. Our professional commit-
ment to our customers places us well above the common
standard. We take great pride in the safety and reliability of
our products. Commitment to quality is not just an idle boast-
our products are covered by full written warranties. In fact,
we insure all our products against accidental damage due to
manufacturing defects and poor workmanship after sale and delivery.
Descriptions and illustrations are purely indicative. Without prejudice to the essential features
of the models described and illustrated herein, the Company reserves all rights at any time, and
without notice, to make product changes considered necessary for improvement or required
in the interest of product engineering and sale. Without the previous authorisation of Brevetti
MONTOLIT S.p.A., the partial or total reproduction of this manual, in any format or by any
means or process, is strictly prohibited, whether such reproduction be mechanical, photographic
or electronic.
Any of these activities will incur legal liability and may give rise to penal action being taken.
DECLARATION OF COMPLIANCE WITH EEC REGULATIONS
We declare under our responsibility that the machine de-
scribed in these instructions is in accordance with the di-
rectives:
EN 55014-1:2017 · EN 55014-2:2015 · EN 61000-3-
2:2014 · EN 61000-3-3:2013 · EN 60745-1: 2009 + A11.
DISPOSAL OF WASTE EQUIPMENT BY USERS IN PRIVATE
HOUSEHOLDS IN THE EUROPEAN UNION
This symbol on the product or on its packaging in-
dicates that this product must not be disposed of
with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment
by handing it over to a designated collection point
for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that pro-
tects human health and the environment. For more information
about where you can drop off your waste equipment for recy-
cling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.