USB Adapter
Indicator Light
Charging
Charger Base
Indicator Light
Volume Up Button
Volume Down Button
(also controls mute)
Headset with Pre-Installed Eartip
Extra Eartips
4
Subscription Button
Base Power Supply
USB Charging Cable
Call Control Button
Indicator Light
Microphone
CD includes:
• Plantronics Software
• Complete User Guide
1 Connecting USB Adapter to PC
Insert the USB adapter into USB Port on PC. The indicator light on the USB adapter will
1-1.
be solid red to indicate the USB adapter is powered on and will turn solid green when it finds
the headset.
1-2.
The USB adapter can be folded as shown.
NOTE
The headset may need to be charged before the USB adapter can find it.
ImPORTANT NOTE
It is recommended that Windows be updated with Service Pack levels listed
below:
Microsoft Windows XP Service Pack 3 (SP3) or later
Microsoft Windows Vista Service Pack 1 (SP1) or later
2 Connecting Power Supply to Charger Base
2-1.
Connect the base power supply into the power jack on the charger base.
2-2.
Connect the power supply to the outlet. The charging indicator light will be solid green.
3 Docking and Charging Headset
3-1.
Gently push the headset into the charge cradle.
The charging indicator light on the charger base will flash
green to indicate that the headset battery is charging.
3-2.
Charge for at least 20 minutes prior to the
first use. A full charge takes 3 hours.
NOTE
The USB charging cable can also be used to charge the headset. To successfully charge
your headset with the USB cable the PC must be on and in an active state (not standby). The
charging time will vary according to the number of other devices drawing power from the PC's USB
port(s).
NOTE
The product has a non-replaceable battery. Contact Plantronics for replacement information.
Charging time
20 min .....................
minimum charge
before first use
3 hours ...................
Full charge
5