DreamGEAR DGUN-2869 Guía De Usuario página 3

Se ing up the Micro Controller
1. Gently insert the 2.5mm plug end of the included AV cable
into the top of the Micro Controller.
2. Plug the other end (white and yellow plugs) into your
television.
3. Turn your television to the proper input se ing.
NOTE: Please refer to your television's user guide on how to
connect an AV cable and for input se ings.
4. Move the "ON/OFF" switch located on the top of the Micro
Controller to the "ON" position.
NOTE: A red LED below the ON/OFF switch will light up when
the controller is powered on.
5. Select a game using the directional pad.
NOTE: Make sure that you turn the Micro Controller o
when not in use to save ba ery life.
Ba ery information
Leakage of ba ery acid can cause personal injury as well as
damage to your controller. If ba ery leakage occurs,
thoroughly wash the a ected skin and clothes. Keep ba ery
acid away om your eyes and mouth. Leaking ba eries may
make popping sounds.
To avoid ba ery leakage
• Ba eries should be installed and replaced only by an adult.
• Do not mix used and new ba eries (replace all ba eries at
the same time).
• Do not mix di erent brands of ba eries.