Base Unit; Usage In Accordance With The Intended Purpose - Rohm F-Senso SMALL Manual De Manejo

Usage in accordance with the intended purpose

Thank you very much for choosing the F-senso pull-in measurement device from
RÖHM. Please read through the user's guide carefully before using the device and
always keep it at the place where the device is being used.
Usage in accordance with the intended purpose
1.
The F-senso pull-in measurement device is used to measure the axial pull-in force of
tool clamping systems in the machine spindle. Forces can be measured on different
tool clamping systems such as, for example, a steep-angle taper (SK) or hollow
shank taper (HSK). This is realised through the use of different adapters.
Adapter

Base unit

The device may only be used on an upright machine spindle.
2
Heinrich-Röhm-Str. 50, 89567 Sontheim/Brenz., GERMANY, Tel. (49)7325/16-0