Philips Respironics DreamStation Guía De Instalación Y Funcionamiento página 5

Number
1-x Connection Error
Internal Communication
2-x
Error
Software Configuration
3-x
Error
Invalid Device
4-x
Configuration Error
Network Configuration
5-x
Error
Note: Philips Respironics proprietary compliance software is developed by Philips
Respironics and is intended for use by physicians and home care providers.
Removing the Accessory
1. Ensure the therapy device is turned off.
2. Open the accessory door on the therapy device.
Meaning
Try removing power from the therapy device by unplugging
the power supply cord's connector from the power inlet
on the side of the device, wait 10 seconds, then plug
the cord in again. The, try initiating a manual connection
by navigating to the My Provider menu on the therapy
device and selecting "Upload." See the "Connecting to the
Compliance Software" section of this guide. If problem
persists, contact your provider.
The provider should check the Philips Respironics
proprietary compliance software for additional information.
Try initiating a manual connection by navigating to the
My Provider menu on the therapy device and selecting
"Upload." See the "Connecting to the Compliance
Software" section of this guide. If problem persists, contact
your provider.
The provider should check the Philips Respironics
proprietary compliance software for additional information.
Try initiating a manual connection by navigating to the
My Provider menu on the therapy device and selecting
"Upload." See the "Connecting to the Compliance
Software" section of this guide. If problem persists, contact
your provider.
The provider should check the Philips Respironics
proprietary compliance software for additional information.
Contact your provider. The provider should check the
Philips Respironics proprietary compliance software for
additional information.
If the error message indicates that your Passkey is
incorrect, make sure you have selected the correct
network, and try entering your password again.
If the error message indicates that your network is
unavailable, verify that the Wi-Fi Accessory has been
installed and setup correctly and is within range of your
wireless network. If the problem persists, try rebooting
your wireless network. Contact your network provider for
additional information.
Open Accessory Door
Action
5