Ecco EC7000-QK Instrucciones De Instalación página 7

BEEP: To turn on/off the warning tone. Default setting is ON and there will be a beeping sound when menu is
being operated.
SYSTEM: To set TV system: PAL/NTSC.
DIMMER: To set backlighting brightness level of screen. Five levels and AUTO option are available; the higher
the level, the brighter. When set as AUTO, backlighting automatically adjusts in accordance with the outer
brightness.
MAIN MENU
CAMERA
CAMERA
OSD
SYSTEM
TRIGGER
TRIGGER
SPLIT
RESET
TURN IMAGE: To set the camera input(s) to be displayed when left-side camera (camera 1)/right side camera
TURN IMAGE: To set the camera input(s) to be displayed when left-side camera (camera 1)/right side camera
(camera 2) is activated. When set as SINGLE, correspond camera input will be displayed when either camera is
(camera 2) is activated. When set as SINGLE, the corresponding camera input will be displayed when either camera is
activated. When set as SPLIT, split image of left-side and rear view camera will be displayed when left-side
activated. When set as SPLIT, split image of left-side and rear view camera will be displayed when left-side
camera is activated; split image of right side and rear view camera will be displayed when right side camera is
camera is activated; split image of right side and rear view camera will be displayed when right side camera is
activated.
activated.
REAR IMAGE: To set the camera input(s) to be displayed when rear view camera is activated. When set as
BACK, the rear view camera will be displayed when activated. When set as TRIPLE, left-side, right-side and rear
view camera will be displayed.
TIRGGER DELAY: To set the delaying time of video d isplay when trigger signals goes off. Delaying time frame: 0-
30 seconds.
SPLIT SCREEN: To set camera input(s) to be displayed when 'split' trigger wire is activated. LEFT/RIGHT is to set
the camera input to be displayed on the left/right side of monitor screen. AUDIO is to set the audio output form
any of the four cameras.
MAIN MENU
CAMERA
CAMERA
OSD
SYSTEM
TRIGGER
TRIGGER
SPLIT
RESET
TRIGGER PRIORITY: To set camera trigger priority.
SETUP
NAME
SETUP
SETUP
or
SETUP
PRIORITY
SETUP
ALL
SETUP
NAME
SETUP
SETUP
or
SETUP
PRIORITY
SETUP
ALL
TRIGGER SETUP
TURN IMAGE (SINGLE/SPLIT)
REAR IMAGE
TRIGGER DELAY
SPLIT SCREEN:
LEFT (LEFT/FRONT/BACK)
RIGHT (RIGHT/FRONT/BACK)
AUDIO (all four cameras)
TRIGGER PRIORITY
ST
1 PRIORITY
(FRONT/BACK/SPLIT/LEFT/RIGHT)
ND
2 PRORITY
(FRONT/BACK/SPLIT/LEFT/RIGHT)
RD
3 PRIORITY
(FRONT/BACK/SPLIT/LEFT/RIGHT)
TH
4 PRIORITY
(FRONT/BACK/SPLIT/LEFT/RIGHT)
TH
5 PRIORITY
(FRONT/BACK/SPLIT/LEFT/RIGHT)
(BACK/TRIPLE)
(select delay)
Page 7 of 8