Dcf Receiver Version; Dhw (869 Mhz) Receiver Version; Ntp Receiver Version - Gorgy Timing HanDi 300 Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.2.4. DCF RECEIVER VERSIOn

Depending on the power supply option, connect the clock to the mains.
The hands are positioned at 12 o'clock and then, 3 to 4 minutes after
receiving the code, are positioned according to the received time information.

2.2.5. DhW (869 Mhz) RECEIVER VERSIOn

Change the switch position on the back onto the "On" position.
The hands are positioned at 12 o'clock and then, 2 to 3 minutes after
receiving the code, are positioned according to the received time information.

2.2.6. ntP RECEIVER VERSIOn

a/ 230VaC version
Connect the clock to the computer network.
Connect the clock to the mains.
Change the switch position on the back onto the "On" position.
B/ POE version
Connect the clock to the POE injector.
Change the switch position on the back onto the "On" position.
The hands are positioned at 12 o'clock and then, 3 to 4 minutes
after receiving the code, are positioned according to the received time
MDE-HANDI-2078V2.0
To reset, open the clock and press the "reset" button once.
information. For the advanced configuration,
see section 5. WEB INTERFACE.
31

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Handi 304Handi 390Handi 450Handi 620Handi 800

Tabla de contenido