Main Unit - Quasar HQ-2101SH Instrucciones De Uso

2
HOW TO ATTACH THE DRAIN PAN (OPTIONAL)
Remove the rubber plug and
1
slide the chassis out from the
cabinet.
Install the optional drain pan (part no. CWH40175).
2
Install the drain pan at the
right corner of the cabinet
using 2 screws (part no.
CWG86C733).
NOTE
The drain pan (part no.
CWH40175)
obtained from nearest
servicenter.
3

MAIN UNIT

4
8 Ventilation lever
9 Main control panel
THERMOSTAT
5 6
4 7
c
3
2
1 10
b Main Control Knob
c Thermostat Control Knob
Remove the
rubber plug
INTERNAL VIEW
Screws
Drain pan (optional)
can be
1
2
6
7
8
5
3
9
The ventilation lever must be in the CLOSE position in order to maintain the best cooling
conditions. When fresh air is necessary in the room, set the ventilation lever to the OPEN
position. The damper is opened and room air is drawn out.
AIR SWING
a a Air Swing Switch
OFF ON
OFF Stops the operation of Air Swing.
HIGH
FAN
ON Air Swing is in operation.
LOW LOW
FAN COOL
(Only for LOW COOL, MED COOL, HIGH COOL and ECONOMY
8
OFF HIGH
COOL
9
operation.)
b
High fan speed operation (without cooling)
Low fan speed operation (without cooling)
Stops all operation
For decreased cooling
Connect a drain hose (optional).
3
Fit the drain hose to the drain pan.
NOTE
Drain hose or tubing can be
purchased locally to satisfy
your particular needs.
Slide the chassis back
4
into the cabinet.
Reinstall the cabinet to
chassis by using screws.
1 Air inlet louver 4 Air filter
2 Cabinet 5 Front intake grille
3 Power cord 6 Front grille
7 Vertical airflow direction vane
(Airflow direction adjustment up-down).
The vertical airflow direction vane is controlled by
rotating the horizontal vane forward or backward.
HIGH
FAN Low fan speed with cooling operation
LOW LOW
FAN COOL
High fan speed with cooling operation
HIGH
OFF
COOL
THERMOSTAT
5 6
4 7
For increased cooling
3 8
2 9
1 10
EXTERNAL VIEW
Under-side view with drain
pan and hose in place.
AIR SWING
OFF ON
Drain hose
(not included)