ATON DHSIP SOURCE INPUT WALL PLATE Manual Del Usuario página 17

DHSIP Source Input Wall Plate
Rear Connections
DHTP1 Amplifi ed Touch Pad
When utilizing the DHSIP as a means to connect a
Local Source to a specifi c zone of a DH44-based
system, rear connections consists of plugging in a
Cat-5 wire terminated to an RJ-45 connector wired
to T-568A standard to the RJ-45 jack on the rear of
the DHSIP. The other end simply plugs into the LOCAL
PORT RJ-45 jack on the rear of the zone's DHTP1
Amplifi ed Touch Pad. See Figure 3.6 for details.
DHSIP
DHTP1 Posterior
Vista Lateral
Cat-5
Figure 3.6: DHSIP to DHTP1 - Rear Connections
© 2008 • All rights reserved. 15