Akasa integral P2NSX Manual Del Usario página 5

Hard Disk Installation
. Open the back of the enclosure by undoing the securing screws and sliding the tray out of the
aluminum housing.
2. Place the HDD on the tray, line-up the connectors with the drive and gently insert the HDD
into the tray's connector until the connection is secure.
3. While supporting the HDD with your hand, gently turn the tray over and locate the HDD
mounting holes. Use the four screws supplied in the mounting kit to secure the HDD to the
tray.
HDD Installation
SATA connectors
4