Tools And Materials; Before You Begin - Kohler K-505 Guia De Instalacion

Tools and Materials

Safety
Glasses
Sealant
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before
you start installation. If you encounter any installation or performance problems, please don't hesitate to
contact us. Our phone numbers and website are listed on the back cover. Thanks again for choosing Kohler
Company.

Before You Begin

Observe all local plumbing and building codes.
CAUTION: Risk of personal injury. Cast iron baths are extremely heavy. Obtain sufficient help to
carefully lift or move the bath.
CAUTION: Risk of product or property damage. Do not support the bath by the rim. Provide
adequate support under the feet.
Unpack and inspect the bath for damage. Return the bath to the carton until you are ready to
install.
This bath is designed for alcove installation.
Apron baths are not reversible. If the drain and the faucet supplies are located on the left end of the
alcove area, the installation requires a left-outlet bath.
Provide properly dimensioned framing.
Install the bath to an adequately supported, level subfloor.
Before installation, ensure proper access to the final plumbing connections.
This bath conforms to ANSI Standard A112.19.1. All dimensions are nominal.
Illustrations shown may not represent your actual product.
1023720-2-A
Tape
Pencil
Measure
Knife
Square
Blade
Level
Screwdriver
Plus:
Conventional woodworking tools and materials
Drop cloth
2x4's or 2x6's
Water-resistant wall material
Metal shims
Rags
2
Phillips
Screwdriver
Kohler Co.