Change Preset Or Current Programming Code - Gate House G27D01 Manual Del Usuario

SETTING MODE

CHANGE PRESET OR CURRENT PROGRAMMING CODE

IMPORTANT: The preset programming code is 123456.
!
Please change the programming code before operating the lockset.
1. Press [SET] button for more than 2 seconds.
The red LED will light and the lockset will beep twice.
You are now in programming mode.
2. Enter 123456 (or current programming code) and then press
and then press
press button. The red LED will light continuously for 10 seconds. The new
programming code is effective.
button. Enter new programming code (six digits) and then
OFF ON
DEL
SET SET
AUTO LOCK
21
button. Enter [10]
1 2 3
4 5 6
7 8 9
0
C