Diagnostics And Installation - THOMSON Smart Bracket II Manual Del Usuario

C - INSTALLATION
1
2
3
1. Feed the wires into the space provided for this
purpose.
2. Mount the smart bracket using suitable screws
and wall plugs for the type of bracket (the
screws and wall plugs provided are suitable for
solid walls).
3. Connect the connection terminals, ensuring
you follow the colour coding accurately.

4 -DIAGNOSTICS AND INSTALLATION

• Once the wiring has been completed and before
installing the monitor, check the smart bracket
status:
12
EN
m c o n . s o m o h y t m w . w w
COLOUR VIDEO INTERCOM
Indicator light for connecting an additional
monitor :
Red = Connection error
Blue = Connection OK or monitor not present
Power supply indicator light
Red = Connection error
Blue = Power supply correctly connected
Intercom panel connection indicator light :
Red = Reverse polarity
Blue = Wiring OK
Intercom panel connection indicator light
Red = intercom panel not connected (wire
unplugged or cut)*
Blue = connection OK
* This is completely normal if the monitor is
used as an additional monitor on an existing
installation and no intercom panel is directly
connected to it
• If all the indicator lights on the smart bracket are
blue (with the possible exception of the one on the
intercom panel, see above), place the monitor in
its compartment. If not, check installation.
Warning: for this step, do not connect the 230V AC
power supply.
:
: