Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
To turn the system ‚on', press the POWER button on the front panel 1 second, and set the volume to a
low level. The POWER indicator lights up.
•
Press the Function button to select (FM/BLUETOOTH/CD/USB/PHONO/TAPE/DAB) to select your desired function.
•
Start to adjust the volume by using the VOLUME control.
•
When you have finished your listening, press the POWER button 3 seconds to turn off the unit. The
POWER indicator goes off.
•
Press the Function button to select USB, then " NO USB" and words "USB" will be shown
•
Insert a USB device into the USB socket. The player will begin to MP3 icon will be shown while MP3
is detected.
•
Press PLAY/PAUSE button to start or pause playback of the selected track in the CD/USB mode.
•
PLAY/PAUSE, DN/F .R/UP/F .F and STOP functions are the same as in CD play mode.
You may press the FUNCTION button on the unit or the PLAY/P AUSE button on the remote control to
change the playing mode between CD and USB.
•
Turn the system on, press the FUNCTION button to enter CD mode.
•
Press the OP/CL button to open the CD drawer.
•
Place your disc (MP3 is comptiable) in the CD drawer with the label side facing up.
•
Press the OP/CL button again to close the CD drawer. The disc will spin for a few seconds while the
player is reading the disc, then the disc stops spinning and start to play the first track of the disc.
•
MP3 icon will be shown while MP3 is detected. No icon will be shown when no MP3 file is detected in
the disc.
PLAYING IN MP3 MODE (UNDER CD/USB OPERATION)
•
Press PLAY/PAUSE button to start or pause playback of the selected track in the CD/USB mode.
•
While playing the song, the song number and folder number of you.
•
You can stop the playback at any time by pressing the STOP button.
If there are no further indications or signals within 10 to 15 minutes, the device will
automatically shut down Only applicable in Europe market.
Operation
Power On
USB
CD
19
EN
Publicidad
Tabla de contenido
