S Ervice /M Aintenance; Reventive Maintenance - SUHNER ABRASIVE LWC 21 Documentación Técnica

4. S
ervIce
4.1 P

reVentiVe mAintenAnce

Without a tool clamped in check no-load speed periodi-
cally and after each maintenance. Even if the machine still
operates perfectly, the motor should be removed, cleaned
and the four slides checked for wear by a specialist after
approx. 300 to 400 operating hours. The lubricant in the
gear head (Isoflex NBU 15) should be replaced (do not
wash out).
4.1.1 r
ePlAcement of the exhAust Air hose
Detach the exhaust air hose from the swivel ring, and re-
place ist.
4.1.2 r
ePlAcement of the suPPly house
Remove the exhaus air hose (vedere punto 4.1.1).
Detach the hose clamp, and pull the supply house off the
connection nipple.
/m
aIntenance
13