Usage Conditions; Working Area; Electrical Safety. General Rules; Electrical Safety Of The Battery - Enarco TORNADO E-BATT Manual De Instrucciones

3.

USAGE CONDITIONS

WARNING!

3.1 WORKING AREA

KEEP your working area clean and well lit. Cluttered benches and dark areas invite accidents.
DO NOT OPERATE power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust.
KEEP AWAY from standers, children, and visitors while operating a power tool. Distractions can
cause to lose control.

3.2 ELECTRICAL SAFETY. GENERAL RULES.

DO NOT EXPOSE the machine to rain or wet conditions.
DO NOT OPERATE the machine if any cable is damaged.
DO NOT OPERATE the machine if the switch or the connections box is damaged.
If you detect any electrical damage to the machine, contact the technical service of ENARCO or an
authorized dealer.

3.3 ELECTRICAL SAFETY OF THE BATTERY

USE only the battery 104490 / 5RSK0001 from ENARCO to power the machine.
CHARGE the battery only with the charger 5RSK0002 supplied by ENARCO.
Make a FULL CHARGE of the battery before using it.
DO NOT OVERLOAD the battery. Disconnect the charger from the mains once the light of the LED
indicator turns into green colour to avoid damaging the battery.
en
FIX the battery to the machine by turning the lock key. Store the key and its copy in a safe place to
avoid missing it.
NEVER subject the rechargeable battery to IMPACTS.
NEVER open the battery, neither manipulate the connections.
DO NOT EXPOSE batteries to sources of heat or fire.
Operation TEMPERATURE of the battery is between -10ºC and 50ºC.
DO NOT EXPOSE the battery to rain or wet conditions. Keep it clean and dry.
CLEAN carefully the contacts of the battery with a clean and dry cloth in case they get dirty.
NEVER short-circuit the battery.
If the battery is to be STORED for long periods of time, a full recharge should be performed every 3
months.
Batteries must be STORED in a dry place and away from the direct sunlight.
NEVER store batteries in hazardous locations where they can short-circuit to each other or through
other conductive materials.
KEEP the battery away from children.
KEEP the battery away from small metal objects that can cause a bridge connection between
contacts. It may cause a short circuit and a battery fire.
REMOVE battery from machine when transporting.
REMOVE battery from machine when storing.
If you detect any electrical damage to the battery, contact the technical service of ENARCO or an
authorized dealer.

3.4 ELECTRIC SAFETY OF THE CHARGER

USE only the battery charger 5RSK0002 from ENARCO to power the battery.
Before using the charger check the CABLE and the PLUG are in good condition.
NEVER use a damaged charger. It can cause battery failure and / or user injury from electric shock.
NEVER open the charger, neither manipulate the connections nor the plug.
6
READ AND UNDERSTAND EVERY INSTRUCTION.
"TORNADO E-BATT" BATTERY VIBRATING SCREED