Random Play; Programmed Play - Naxa NPB-250A Manual De Operación

3. Press and hold the SKIP/SEARCH up button in music play to search up at quick rate for a
specific point to play.
4. Press and hold the SKIP/SEARCH down button in music play to search down at quick rate for a
specific point to play.
5. Press +10 /ALBUM button once in play to skip to the track 10 tracks ahead, twice to skip to the
track 20 tracks ahead. You can reach the last track of the disc using this button.
REPEAT A SINGLE TRACK
To repeat a preferred track in playback, press MODE button once, the corresponding icon of
repeat single track shows in the LCD. Then select the preferred track using SKIP/SERCH buttons
or +10/ALBUM button. The player will repeat the chosen track until you press STOP button.
REPEAT ALL TRACKS
To repeat all tracks, press MODE button twice in play mode, the corresponding icon of repeat all
tracks shows in the LCD. The player will repeat all tracks until you press STOP button.
INTRODUCTION PLAY
Introduction play is that the first ten seconds of each track are played in a sequential order. Press
MODE button three times to enter this mode during play, the icon of introduction play shows in the
LCD. Press MODE button to exit Introduction play mode and normal music play resumes. Press
SKIP/SEARCH up button in Introduction mode to begin Introduction play from the next track
immediately after the current track. Press SKIP/SEARCH down button in Introduction mode to
begin Introduction play from the current track.

RANDOM PLAY

Random play is that tracks on the disc are played by the player at random. Press MODE button
four times to enter this mode during play, the icon of random play shows in the LCD. Tracks on
the disc will be selected at random for playback and the player stops automatically after all tracks
are played. You may press STOP button to exit random play mode and press PLAY/PAUSE button
to resume normal playback.

PROGRAMMED PLAY

Programmed play is that tracks on the disc can be edited for playback in a preferred order with the
use of PROGRAM button.
In CD stop mode, press PROGRAM/EQ button once, "PROG" shows in the LCD with a flickering`
track number and the program sequence indication "P-01", select the first track to be programmed
using SKIP/SEARCH buttons or +10/ALBUM button, and press PROGRAM button again to store
and advance to the next programming step. The program sequence indication changes to "P-02"
waiting for your next input.
Repeat the steps above to program more tracks. A maximum of 20 tracks can be programmed in
memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order after you are done
with programming. The player stops automatically after all programmed tracks are played.
You may press STOP button to terminate programmed playback. In program stop mode, press
STOP button again to clear the programming; press PLAY/PAUSE button to begin the
programmed playback with the programming order identical with the previous one done.
MP3-CD PLAYBACK
This player is capable of MP3-CDs. It takes longer time for this player to read an MP3-CD than it
does CD-DA. Wait patiently while it is reading.
After an MP3-CD is successfully read, the total number of albums and tracks shows in the LCD
together. And a second later, playback begins from the first track of the first album with the icon of
"MP3"showing on the screen.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
1. Press once the SKIP/SEARCH up button in music play to skip to the next track. To skip to a
specific track ahead, press this button several times.
EN-6