Pulsar FORWARD F455 Instrucciones De Uso página 11

Malfunction Possible reason
The device will not focus. Incorrect setting.
Impact point does not Display calibration required.
coincide with aiming point.
The device is not securely mounted
on the sight, or the sight on the
weapon.
The attachment slides off Adapter insufficiently clamped.
the sight during firing. Unsuitable insert selected.
Cannot open the adapter Unsuitable insert selected.
clamp.
By following the link below you can find answers to the most frequently asked questions
https://www.pulsar-nv.com/glo/support/faq/79
Correction
Adjust the device in accordance with
section "Operation". Check the outer
surfaces of the lens and eyepiece; where
necessary, wipe them free from dust,
condensate, frost, etc. In cold weather, you
can use special anti-fogging coatings (as,
for example, for corrective glasses).
Calibrate the display in accordance with
the instruction in the section, "Display
Calibration".
Check that the device is firmly fixed on the
sight and that the mounting of the sight to
the weapon is secure.
Ensure that you are using the very type of
ammunition that was previously fired from
your weapon.
If you zero a sight in summer and then use
it in winter (or vice versa), some change
in the zero point of the zeroing cannot be
discounted.
Select a suitable insert and clamp the
adapter as recommended.
Select a suitable insert. Check for a gap
between the lips of the adapter.
Electromagnetic compatibility.
This product complies with the requirements of European standard EN 55032: 2015, Class A.
Caution: Operating this product in a residential area may cause radio interference.
Attention! Forward digital night vision devices require a licence if exported outside your country.
Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
11