Installation Instructions - LeakSmart Waxman 8810100 Manual De Instalación Y Funcionamiento

LeakSmart Washing Machine Kit

Installation Instructions:

1. Shut off the hot and cold valves that supply water to
your washing machine.
2. Remove the hot and cold washing machine hoses
from both valves. Mark the hoses so you know
which hose goes to which valve.
NOTE: Do not remove hoses from washing machine.
1.
2.
6.
Installation Instructions:
3. Your existing hot and cold manual shut-off
valves will have outlets that either face you,
or face downward.
A. If the outlets face you: Hand tighten
the LeakSmart Valves to the manual shut-
off valves so their outlets point downward
as shown in the diagram. Note that a
washer has been pre-assembled into each
coupling nut.
B. If the outlets face downward: Hand
tighten the LeakSmart valves to the manual
shut-off valves so their outlets point side
ways as shown in the diagram. Note that
a washer has been pre-assembled in each
coupling nut.
4. Hand tighten the hot and cold washing
machine hoses to the correct LeakSmart
Valve.
LeakSmart Washing Machine Kit
shut-off shut-off
valve
valve
3A. 3B.
4.
7.