LeakSmart Waxman 8810100 Manual De Instalación Y Funcionamiento página 9

LeakSmart Washing Machine Kit
Troubleshooting
Problem
You turn on the washing machine, but no
water flows
Leak Sensor becomes wet but LeakSmart
Valves do not close
What to Check
- Make sure both sides of Leak Sensor are
dry, then push the OPEN button to make
sure LeakSmart Valves are open.
- Make sure the hot and cold manual shut-off
valves are open.
- Unplug long flat wire from Leak Sensor and
reconnect.
- Make sure there is power to the outlet.
- Unplug AC Power Adaptor cord from
Control Panel and plug back in.
- Unplug 6-pin connector from Control Panel
and reconnect.
- Locate plug connection between Control
Panel and each of the LeakSmart Valves.
Unplug both connections and reconnect,
making sure arrows on side of plugs line up.
- If an AC Power Adaptor Extension Wire was
used, unplug both ends and reconnect.
- Make sure fresh batteries are in the Control
Panel.
16.
Manual Operation of LeakSmart Valve
1. Unplug the connection between the Control Panel and the LeakSmart Valve.
2. Pull the plastic motor cover off the LeakSmart Valve and slide it down the wire until it stops at the
plug. Note that no tools are needed to remove the cover.
3. Use a marker and draw a line across the top of the plastic motor housing. This way once the motor
is removed, you will know how to reposition it for assembly.
4. Remove the 4 screws using a Phillips head screwdriver.
5. Place thumb and finger on plastic gear and rotate clockwise to open valve or counter clockwise to
close it. Do not use tools to manually open or close valve.
2 Year Limited Warranty
Waxman Consumer Products Group warrants the enclosed LeakSmart product to be free from defects in materials
or workmanship, under normal use and service, for a period of two (2) years from the date of purchase. If at any time
during the warranty period the product is determined to be defective, Waxman Consumer Products Group shall repair
or replace it (at our option). The warranty is limited to defective parts as stated. All costs of removal and installation of
the LeakSmart product, including the replacement of warranty parts, are the responsibility of the purchaser. The
manufacturer shall not be liable for incidental, consequential, or special damages arising at, or in connection with
product use or performance, except as may otherwise be accorded by law. Some states do not allow the
exclusion limitation of incidental or consequential damages, so the limitation may not apply to you. Any damage to
this LeakSmart product as a result of misuse, abuse, neglect, accident, improper installation, or any use violating the
instruction manual furnished by us will void this warranty. This warranty does not cover damages or loss caused by
defects, and the owner's use of the LeakSmart product confirms the understanding that this product does not
constitute an insurance policy, and is only a loss mitigation product used to reduce the risk of water damage.
To obtain warranty service, call our Customer Service Department at 1-800-531-3342, or e-mail us at
customerservice@waxmancpg.com. You may also send the product and original dated sales receipt, prepaid
US postage to: Waxman CPG, 24455 Aurora Road, Bedford Heights, Ohio 44146, Attention: Customer Service.
LeakSmart Washing Machine Kit
17.