Maintenance - Duux Slim 1000 Manual De Usuario

Office mode setting
The default high temperature value is set at 23°C
and low temperature is 18°C.
Note: There are 4 periods (P1,P2,P3,P4) in this
mode:
P1: 07:00-12:00 23°C
P2: 12:00-14:00 23°C
P3: 14:00-17:00 23°C
P4: 17:00-07:00 18°C
The pre-set temperature will follow the same
cycle every day. The desired temperature can be
adjusted at all times but will return to the default
value in next cycle.
Cabin mode setting
The default high temperature value is set at 23°C
and low temperature is 18°C.
Note: There are 2 periods (P1,P2) in this
program:
P1: 08:00-23:00 23°C
P2: 23:00-08:00 18°C
The default temperature will stay on for a cycle of
30 days, after which the temperature will go down
to a continuous 18°C. The default temperature can
be adjusted and will last of one cycle of 30 days
12
and will return to the default value in next cycle.
The 30 days cycle can be adjusted to a shorter time
frame pressing the timer button for 5s. The default
day 1 will begin to flash. Press + or – to increase
the requested day in the 30 day cycle. For example;
change the day to 14 to run the Cabin mode for 16
days instead of 30. When the desired start day is
set, confirm this by the pressing timer button again
or leave it untouched for 3s.

4. Maintenance

Important: Be sure to remove the power plug
from the outlet before carrying out maintenance.
Warning: Allow the heater to cool down before
cleaning it.
Note: In case of malfunction or doubt, do not try
to repair the heater yourself, it may result in a fire
hazard or electric shock.
Cleaning
Wipe the exterior surface of the heater occasionally
with a soft damp cloth (not dripping wet) and dry
the exterior surface before operating the heater.
Warning: Do not immerse the heater in
water. Do not use any cleaning chemicals such as
detergents and abrasives. Do not allow the interior
to get wet as this could create a hazard.
Storing
To store away the heater, put the heater back into
its original package and store it in a clean dry place.
Spare parts
Spare parts and accessories can be requested at
the point of purchase or local distributor.
13