Descaling The Kettle; Handling And Transportation - Beko WKM4321B Manual Del Usuario

2 Operation
C
Do not place the water tank (10)
on the base (8) while filling it with
water.
Lid (3) should always be closed
C
during
otherwise the kettle will not switch
off automatically.
WARNING: Do not open the lid (3)
A
as hot water could splash out. Make
sure that no water splashes onto
the base (8).
3 Information

3.1 Descaling the kettle

Descaling extends the life of your kettle. Descaling
period depends on the water hardness of your
area.
1. Fill the heater with water up to the maximum
level and boil.
2. After the heater is switched off, unplug the
appliance.
3. Add 2 cups of white vinegar or 1 tablespoon of
citric acid into the boiled water.
4. Keep the solution in the heater for a few hours.
5. Then pour it and rinse the inner part of the
heater thoroughly.
6. Fill the heater with clean water and boil it.
7. Then empty the heater and rinse with water
again.
Kettle / User Manual
the boiling process;
C
Let the kettle cool down between
each heating process.
WARNING: Never use petrol
A
solvents, abrasive cleaners, metal
objects or hard brushes to clean the
appliance.
A
WARNING:
appliance, base (8) or power cord in
water or any other liquid.
3.2 Storage
• If you do not plan to use the appliance for a long
period of time, please store it carefully.
• Make sure the appliance is unplugged, cooled
down and completely dry.
• Store the appliance in a cool, dry place.
• Make sure the appliance is kept out of the reach
of children.
• Wind up the power cord around the cable coil (9)
on the bottom of the base (8).
3.3 Handling and
transportation
• During handling and transportation, carry
the appliance in its original packaging. The
packaging of the appliance protects it against
physical damages.
• Do not place heavy loads on the appliance or the
packaging. The appliance may be damaged.
• Dropping the appliance will render it non-
operational or cause permanent damage.
Never put the
11 / EN