Function Setting; Diffusing Setting; Lighting Setting; Sound Setting - Oregon Scientific WS903 Manual De Usuario

To pour the water out
1. Turn the unit around to view front of the product
(LCD facing you).
2. Pour the water out from the left edge.
IMPORTANT Do not empty water from the air tunnel or
other sides.If water goes into the air tunnel during transportation,
it will be normal that water passing out from the bottom.
The air tunnel inside is designed as water resistant. Please
wait unit the air tunnel is dry before use.

FUNCTION SETTING

MANUALLY SET CLOCK
1. Press RESET to enter setting mode.
2. Press BRIGHTNESS or VOLUME to change the
settings or press and hold + / – to rapidly change
the settings.
3. Press TIMER to confirm and move to next setting.
The setting order is: 12/24 hr format and time.

DIFFUSING SETTING

1. Press DIFFUSE to enter setting mode.
2. Press DIFFUSE repeatedly to select desired
diffusing mode or to turn diffuser off.
The setting choices are:
- ON for 120 minutes
- 30 seconds ON & 30 seconds OFF
- OFF
RMR329P_M_EN_R1.indd 4
NOTE When there is no or not enough water, the diffusing
function will be automatically switched OFF.
The " " will continue flashing to indicate low water level.
Turn OFF the unit first and fill enough water and then
turn it ON again.
The mist output should not be directed towards
furniture or electrical appliances.

LIGHTING SETTING

1. Press LIGHT to enter setting mode.
2. Press LIGHT repeatedly to select desired lighting
mode or to turn lighting off.
3. The setting order is: red, orange, yellow, green,
blue, purple, loop and OFF.

SOUND SETTING

1. Press SOUND to enter setting mode.
2. Press SOUND repeatedly to select desired
soothing sounds or to turn sound off.
3. The setting order is: soothing sounds (1-5) and
OFF.

SLEEP TIMER SETTING

1. To adjust sleep timer setting
2. Press SLEEP to enter setting mode.
Press SLEEP repeatedly to change the sleep timer
setting or to turn it off.
3. The setting (minutes) order is: 120, 90, 60, 30, 15
and OFF.
To view time remaining:
Press SLEEP.
IMPORTANT Press SLEEP twice to change sleep
timer from OFF (OFF, 120, 90, 60, 30, 15, 0 min).
4
6/21/07 12:45:25 PM