URBANGLIDE MOTO CROSS 2.0 Manual De Usuario página 6

ASSEMBLAGE
Handlebar assembly (5min)
1. Place the handlebar in front of the
fasteners provided for this purpose.
Number Assembly (Screwdriver)
Inflating tires
It may be that the transport and the time between manufacture and first use is slightly deflating the tires.
Use a pressure pump to inflate your tires. It is not recommended to use a station inflator, which is
thought to inflate totally different wheels.
•
Inflation
Remove the cap on the wheel, inflate the tire, using a bicycle pump, and replace the cap.
Rely on the PSI indicated on the wheel to know when to stop inflating.
2. Align the handlebar holes in front of
those on the bike. Use the 5mm wrench to
screw the two parts together.
Place the number holes in front
of those provided for this
purpose. Screw with a
screwdriver.
CAUTION: Regularly check the tire pressure, it
ensures your comfort and safety with each use.
6