URBANGLIDE MOTO CROSS 2.0 Manual De Usuario página 8

CAUTION: Turn off the motorcycle before handling the following parts.
Adjust the brakes (10min)
1. To adjust the brake cable,
unscrew the small black portion on
the brake until you reach the
desired fit.
Remember to always check the brakes before each use. For this, without getting on the bike, exert a slight
acceleration, then press the brake, the bike is supposed to stop.
CAUTION: If the brakes are not properly installed, they may block or damage your wheels and tires.
Always check before using the motorcycle that the brakes do not rub on anything.
Train in an unobstructed area to use your brakes, to familiarize yourself with stopping your bike.
MAINTENANCE AND REPARATION
2. If you have trouble screwing or
unscrewing, you can use the 10mm
wrench. Make sure the nut is tight
once the adjustment is made.
8