Special Functions - NOVASTAT EL WEEK Manual Del Usuario

Q S
UICK TART
 
With these keys Slide the frame
+ / -
With these keys change set temperature or adjust what is blinking on the screen.
With this key switch between actual room temperature and set temperature or validate an
OK/
adjustment.
First go to set clock and adjust time
(Use +/ - to adjust minutes, press OK, adjust hours, OK, adjust days, OK )
Go to program menu and select built-in week program
(or edit user program to , see below)
Go to comfort mode and adjust comfort temperature required with +/ - keys
(Default comfort temp. is 21°C)
Go to reduced mode and adjust reduced temperature required with +/ - keys
(Default reduced temp. is 17°C)
Finally go to automatic mode. Your RT-WP Chrono-thermostat is now working and follows the
program.
M
ODES DESCRIPTION
Manual COMFORT operating mode :
Force comfort temperature operation indefinitely or for a few hours or days (see Holiday
function). By pressing + or - key the comfort temperature start to blink and can be adjusted. If you
wait a few seconds the actual room temperature reappears. RT-WP regulation will now follow
comfort temp.
AUTOMATIC operating mode :
RT-WP Chrono-thermostat will follow automatically the program according to the actual time.
By pressing + or - key you can override the current set temperature until the next change in the
program. The segment will lit up. Use + / - keys to adjust the temporary required
temperature. At the next program change the
without any alteration.
Manual REDUCED operating mode:
Force reduced temperature operation indefinitely or for a few hours or days (see Holiday
function). By pressing + or - key the reduced temperature start to blink and can be adjusted. If
you wait a few seconds the actual room temperature reappears. RT-WP regulation will now
follow reduced temp.
Manual ANTI-FREEZE operating mode: (only for heating systems, HOT operation selected)
Force anti-freeze operation indefinitely or for a few hours or days (see Holiday function).
By pressing + or - key the anti-freeze temperature starts to blink and can be adjusted. If you wait
a few seconds the actual room temperature reappears. RT-WP will keep temperature above
freezing.
OFF mode: Use this mode if your Heating or cooling installation needs to be turned OFF.
RT-WP Chrono-thermostat will switch off the installation and then switch itself OFF (blank
screen). User programs are saved, time is kept running and battery consumption becomes very
low. Any key will wake up the - NOVASTAT EL WEEK (RT-WP). The OK /
actual room temperature.
DANGER : I
N THIS MODE YOUR INSTALLATION CAN FREEZE
(RT-WP) is stopped.
inside the top MENU to change operating mode
to
will disappear and the program continues
because the - NOVASTAT EL WEEK
Set CLOCK menu :
Use this menu to adjust the RT-WP clock to the actual time.
use +/ - to adjust minutes
Press OK
PROGRAM menu :
By pressing + or - key the Program number start to blink,
then use +/ - to
select program
If you select a built-in program
you select an user program
EDITION.
USER PROGRAM EDITION :
The + key sets
The - key sets
Use  keys to slide the blinking cursor position in the day and modify or correct easily the
program
When the displayed day is correct press OK to jump to the following day. When you press OK on
the last day you will exit the User program edition and return to the top menu.
Now your user program will be followed if you put the - NOVASTAT EL WEEK (RT-WP) in
automatic operating mode
S
PECIAL FUNCTIONS
HOLIDAY Function :
With   keys go to
number of days
the program.
KEYPAD LOCK Function : Function to prevent children from playing and changing the - NOVASTAT EL
WEEK (RT-WP) parameters
In , ,
simultaneously on the + or - key to lock (
HOT/COLD operation selection : Go to
 key Then press + to choose Hot operation (
( ).
RESET Function : Erases all user programs and sets the RT-WP factory parameters by default.
OFF mode, maintain + and – keys pressed and press simultaneously on the OK key. All the
Go to
segments will lit up during a few seconds showing that the RT-WP has been erased and restarted with
factory defaults parameters.
key displays the
Factory parameters are :
Then re-adjust the time and follow the Q
use +/ - to adjust hours
Press OK
to and press OK this program will be followed in
to and press OK you will enter the USER PROGRAM
Current blinking cursor position hour
temperature at the current blinking program hour
temperature at the current blinking program hour
.
Only for comfort mode, reduced mode or
function. Then you can select with + or - keys the number of hours
before the RT-WP automatically returns to
, and operating modes you can maintain the OK key pressed and press
) or un-lock (
, maintain the OK key pressed and press simultaneously on
) or press - to choose Cold operation
21°C 17°C 6°C
S instructions.
UICK TART
use +/ - to adjust days
Press OK
and use   to see the
other days in the program
shows the daily program
If
anti-freeze mode.
or the
mode and continues to follow
) the keypad.
all comfort HOT operation
Instruction EL Week GB_PPLIMW15047Ab