EXPOSURE
RESOLUTION
LANGUAGE
DEFAULT
E-12
To obtain a more accurate color balance, place a sheet of
white paper under the camera. Select MEASURE then
press ► button to calibrate the color temperature. Wait
until a "MEASURE OK" appears at the lower left corner of
the presentation screen.
Use ▲or▼ buttons to select between Auto or Manual.
AVerVision280 allows you to automatically or manually
adjust the CCD camera to determine how much light is
required.
If you choose to manually adjust the exposure, press
►or◄ buttons to adjust the exposure level.
Use ▲or▼ buttons to select between 50Hz or 60Hz.
Some display devices can not handle high refresh rates.
The image will flicker a couple of times as the output is
switched to another refresh rate.
Use ▲or▼ buttons to choose from 1024x768,
800x600 or 640x480 display resolution then press ►
to make the selection.
Use ▲or▼ buttons to select from nine different languages
then press ► to make the selection.
Use ▲or▼ buttons to select YES to restore to original
factory default setting or NO to exit then press ► to
make the selection.