Cisco Systems LINKSYS WMP11 Guía De Instalación Rápida página 3

point. Click the Ad-Hoc Mode
radio button if you want multi-
ple wireless computers to net-
work directly with each other.
Do not use the Ad-Hoc mode if
you want your wireless comput-
ers to communicate with com-
puters on your wired network.
In the SSID field, enter the SSID
of your wireless network. The
SSID must be identical for all
devices in the network. The
default setting is linksys (all low-
ercase). Click the Next button.
E
If you chose Infrastructure
Mode, go to step F now.
If you chose Ad-Hoc Mode,
select the correct operating
channel for your network. The
channel you choose should
match the channel set on the
other devices in your wireless
network. Click the Next button,
and go to step F.
F
The Setup Wizard will ask you to
review your settings before it
starts to copy files. Click the Yes
button to save these settings,
or click the No button to
change any settings.
G
After the files have been suc-
cessfully copied, the following
screen will appear. Click the
Exit button.
Proceed to Step 2.
E
F
G
3