Monacor LNP-10 Manual De Instrucciones página 9

Please read these operating instructions carefully
prior to installing and operating the unit. Thus, you
will get to know all functions of the unit, operating
errors will be prevented, and yourself and the unit
will be protected against any damage caused by
improper use. Please keep the operating instruc-
tions for later use.
1 Applications
With its powerful magnets, this name badge with
LED light writing can be fastened e. g. to your
clothes. It is programmable via a PC by means of the
infrared transmitter supplied. The message memory
has a capacity of 150 characters for the main mes-
sage and of 80 additional characters for any start
message desired which will scroll once whenever
the name badge is switched on. The messages will
also be preserved when replacing the battery of the
name badge. The scrolling speed of the messages
and the number of repeats of the main message can
also be programmed. The PC programme also al-
lows to memorize the messages entered as files on
the PC and to load them again, if required.
2 Safety Notes
The units (the name badge and the infrared trans-
mitter) correspond to the directive for electromag-
netic compatibility 89/336/EEC.
WARNING The name badge is held by pow-
erful magnets (4). Never use it
when wearing a pacemaker.
The units are suitable for indoor use only. Protect
them against dripping water and splash water,
high air humidity, and heat (admissible ambient
temperature range 0 – 40 °C).
For cleaning only use a dry, soft cloth; never use
water or chemicals.
No guarantee claims for the units and no liability
for any resulting personal damage or material
damage will be accepted if the units are used for
other purposes than originally intended, if they
are not correctly installed or not repaired in an
expert way, or if the software is not correctly in-
stalled.
Dead batteries do not belong in the
household rubbish; always take them to
a special waste disposal (e. g. collecting
container at your retailer).
If the units are to be put out of operation defini-
tively, take them to a local recycling plant for a dis-
posal which is not harmful to the environment.
3 Installation
3.1 PC programme
The following PC system is required:
Microsoft Windows operating system:
Win 98/Win ME/Win NT/Win 2000/Win XP
CPU: Intel Pentium 166 or higher
RAM: 32 MB or more
Screen resolution: SVGA or higher
Serial output: RS232 (9-pole)
CD drive
1) Terminate any active programme under Win-
dows.
2) Insert the programme CD and click "Install Soft-
ware" in the welcome window which will appear.
If the installation programme fails to start auto-