SOMFY Sonesse 30 RS485 Guia De Instalacion página 5

INSTALLATION
Remove Network ID
labels before installing
the crown.
Motor preparation
1) Fit the crown (a) and drive wheel (b)
to the motor.
2) Measure the length (L) between
the middle of the drive wheel and the
head end.
Tube preparation
Cut the tube to the required length.
Deburr the tube and remove the
debris.
Motor/tube assembly
1) Slide the motor into the tube.
2) Fix the tube to the motor with self-
tapping screws or steel pop rivets
depending on the dimension (L).
Mounting the motorized tube on the
brackets
If necessary, screw the bracket inter-
face on the motor head.
Mount the motorized tube on the end
bracket (C ).
Mount the motorized tube on the
motor bracket (D).
Copyright © 2010 Somfy SAS. All rights reserved - V1 - 01/2011
1
2
1
2
a
d
b
c
3