Lenco L-83 Manual De Instrucciones página 6

Clip the E ring on the shaft and place the rubber mat onto the turntable Clip the E ring on the shaft and place the rubber mat onto the turntable
D.
platter.
Caution:
Make sure that the drive belt is not twisted or distorted.
1.
Avoid oil. Oil splashes will make the belt slippery.
2.
Auto Return Reset:
Always do the reset for Auto Return once you move this product. The Always do the reset for Auto Return once you move this product. The
mechanism of Auto Return will rotate irregularly when moving and it will mechanism of Auto Return will rotate irregularly when moving and it will
cause the malfunction of Auto Return. The following steps will reset the
mechanism to normal.
Place a record on the platter and play it.
1.
Manually lever the tone arm and place it to the blank part of the end of Manually lever the tone arm and place it to the blank part of the end of
2.
the record.
The mechanism of Auto Return function will be adjusted properly and The mechanism of Auto Return function will be adjusted properly and
3.
the tone arm will automatically return to the arm rest.
6
The following steps will reset the