Kenmore 116.31040 Manual De Uso Y Cuidado página 7

i ATTACHMENT ASSEMBLY
HOSE AND WAND
1. Insert the tab on
the telescopic wand
into the "J" slot on
the hose handle.
Twist the telescopic
wand to lock in
place.
2. Place the telescop-
ic wand in the wand
holder and route the
hose as shown.
"J" Slot__
Telescopic
Wand'_[!_ 1
Hose [__ 3. Snap the
Hotder_ II_"_T_
hose handle
_._ intothe hose
holder located
on the handle
i:= : :_ of the vacuum
cleaner.
Raised
Edge
Hose
NOTE: Be sure
the raised edge
of the hose
handle rests
against edge of
the hose holder.
4. Rotate the
hose release
lever down
and route the
hose as
shown,
5. Snap the
hose into the
hose cuff on
the side of
the vacuum
cleaner
Hose
Telescopic
Wand
Hose
6. Rotate the hose
Hose release lever
Release upwards to lock
the hose in place.
CAUTION
Do not operate the agitator without the
wand properly ,nserted into the wand
holder and the hose handle properly
secured in the hose holder
7