Whalen WSLWFP48-5 Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
7. With the pilot holes as a guide, fasten two corner connectors (NN) to
the joints where the bottom front molding (N) meets with the bottom
side panels (H and I), using four short screws (EE) per connector.
Hardware Used
EE
M3.5 x 15 mm Short Screw
NN
Corner Connector
8. Screw two floor levelers (OO) onto the installed corner connectors
(NN).
Hardware Used
OO
Floor Leveler
9. Glue four wood dowels (CC) into the bottom inner holes of both
partition panels (J and K) and attach them to the bottom panel (B)
with four long screws (GG).
Hardware Used
CC
Wood Dowel
GG
M4 x 50 mm Screw
RR
Glue
7
EE
x 8
NN
x 2
H
8
I
x 2
B
H
9
The middle stiles face
inward with each other
CC
K
x 4
J
x 4
H
x 1
8
ASSEMBLY INSTRUCTIONS
10a. Glue eight wood dowels (CC) into the top holes of lower side
panels (H and I) and lower partition panels (J and K).
10b. Ask for assistance to position the center shelf (C) onto the inserted
wood dowels (CC) and attach it in place by engaging eight cam
locks (AA).
N
I
Hardware Used
AA Cam Lock
CC
Wood Dowel
RR
Glue
11. Securely screw six cam bolts (BB) into the designated small holes on
the center shelf (C). Fully tighten with a Phillips screwdriver.
NN
Hardware Used
BB
Cam Bolt
OO
12. Glue two wood dowels (CC) into the inner holes of each upper
side panel (D) and attach it to the upper side panel molding (E)
by engaging two cam locks (AA).
Hardware Used
AA Cam Lock
I
CC
Wood Dowel
B
RR
GG
Glue
10
C
K
x 8
J
H
x 8
x 1
11
C
x 6
12
E
AA
x 4
CC
x 4
D
x 1
9
CC
I
AA
BB
x 2