babymoov Yoo-See Instrucciones De Uso página 15

- If the connection is correctly made, the
display the image captured by the camera. Your appliance is now ready for use.
- If the connection fails, the image of the interrupted signal will appear together with a sound signal. Repeat connecting
stages 1 to 4.
B. ADD AN ADDITIONAL CAMERA
- If you need to connect the receiver to other Yoo-See cameras (maximum of 4 different Yoo-See cameras) repeat stages 1
to 4 for each camera, one at a time.
- If the connection between a camera and the receiver is interrupted, you can reconnect the camera to the receiver by deleting
the camera (see stages 5 to 8) and repeating stages 1 to 4.
C. DISCONNECT ONE OR MORE CAMERAS
5. Select the menu icon.
6. Select the icon.
Confirm .
From the main menu, you can set the following functions up:
Brightness
Camera
symbol will appear above the "CAM". The receiver will beep and the screen will
7. Select the icon. Confirm
OPERATION OF THE MAIN MENU
To adjust the brightness of the receiver screen.
Use the and keys to select the brightness level required.
Press the key to come back to the screen.
When you have several cameras connected to a receiver, this icon allows you to enable the
"switch" mode. The screen will display the image captured by all the connected cameras with a
10 second interval. The
When you have several cameras connected to the receiver, this icon will allow you to choose the
camera you want to display on the screen.
Used to add a camera.
Refer to the pairing section to connect a new camera to the appliance.
Used to delete a camera.
Refer to the delete a camera section.
YOO-SEE BABYPHONE • Instructions for use
8. Select the camera you want to delete.
.
switch light will appear on the screen.
CAM1 CAM2 CAM3 CAM4
Confirm . A sound signal will
confirm the deletion and the screen
will return to the image captured by the
last camera connected to the receiver.
EN
15