Whirlpool 7MWTW1950EW Manual De Uso Y Cuidado página 30

Troubleshooting
First try the solutions suggested here or consult the warranty sheet in the washer
If you experience
Washer not performing as expected
Dry spots on load
after cycle.
Incorrect or wrong wash
or rinse temperatures.
Load not rinsed.
Sand, pet hair, lint, etc.
on load after washing.
Load is tangling.
Not cleaning or
removing stains.
30
for assistance and to possibly avoid a service call.
Possible Causes
High-speed spins extract more
moisture than traditional top-load
washers.
Check for proper water supply.
Check for proper water supply.
Not using HE detergent or using too
much HE detergent.
Washer may be tightly packed.
Heavy sand, pet hair, lint, and
detergent or bleach residues
may require additional rinsing.
Washer not loaded as recommended. See "Using Your Washer" section.
Added more water to washer.
Washer not loaded as recommended. Washer is less efficient at cleaning when tightly packed.
Adding detergent on top of load.
Not washing like colors together.
Not using HE detergent or using too
much HE detergent.
The high spin speeds combined with air flow during the final spin
can cause items near the top of the load to develop dry spots
during the final spin. This is normal.
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached to both washer and faucet
and have both hot and cold water flowing to inlet valve.
Check that inlet-valve screens are not clogged.
Remove any kinks in hoses.
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached and have water flowing to
the inlet valve.
Both hot and cold water faucets must be on.
Inlet-valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
The suds from regular detergent can keep washer from
operating correctly.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 additional items after washer has started.
Use the Bulky Items cycle or the Deep Fill option for higher water
fill. See "Cycle Guide" to match your load with the best cycle.
Add 2 Rinses to the selected cycle and/or use Heavy Duty cycle.
Select a cycle with a slower wash action and spin speed;
however, items will be wetter than those using a higher-speed
spin. Use the Bulky Items cycle or Deep Fill option for higher
water fill. See the "Cycle Guide" to match your load with the
best cycle.
Load items in loose heaps evenly around the washplate.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of items being washed.
Washer senses load size and adds correct amount of water. This
is normal and necessary for clothes to move. It is normal for
water to not completely cover the wash load. Added water lifts
the laundry off the washplate, resulting in less effective cleaning.
Load items in loose heaps evenly around the washplate.
Load items in loose heaps evenly around the washplate.
Add detergent, Oxi products, and color-safe bleach to the
bottom of the basket before adding the items.
Wash like colors together and remove promptly after the cycle
is complete to avoid dye transfer.
The suds from regular detergent can keep washer from operating
correctly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow manufacturer's directions
based on load size and soil level.
Solution