Capturing Still Images in a Movie
You can capture still images while recording
a video.
Preparation:
•
Select the recording mode.
1
Set the recording dial to
2
Touch the shutter mode and select
RECORD ONE SHOT or CONTINUOUS
SHOOTING.
•
RECORD ONE SHOT: Records one still
image.
(There will be no indicator display on the
LCD monitor when recording one image.)
•
{
CONTINUOUS SHOOTING: Records still
images continuously.
RECORD ONE SHOT
After performing steps 1-2
3
Press SNAPSHOT.
Manual Recording
Manual recording mode enables you to set the
focus and screen brightness, etc. manually.
Changing to Manual Recording Mode
Preparation:
•
Select the recording mode.
Set the recording dial to manual video
3
manual still image
!
mode.
3
or
.
CONTINUOUS SHOOTING
After performing steps 1-2
3
Select the continuous shooting mode
from the menu.
•
Select from HIGH SPEED /
MEDIUM SPEED / LOW SPEED.
4
Press and hold SNAPSHOT.
•
Recording ends when SNAPSHOT is
released.
•
At this time, SNAPSHOT will not work until
the writing to the media is completed.
The photo indicator lights up
immediately on the LCD monitor when
SNAPSHOT is pressed.
NOTE
•
Recording cannot be performed when the
menu is displayed.
Close the menu.
•
Functions that are only available in still image
mode cannot be used.
(Example: flash, GAIN, etc.)
•
The number of recordable still images
depends on the remaining space on the
recording media.
•
The size of recorded still images is 3072 x
1728, regardless of the image size that is set.
•
The still images recorded in the video mode
contains a little more noise than the still
images recorded in the still image mode.
•
Simultaneous recording (still image
recording) may be performed even when the
dial is set to [M].
manual video
manual still image
To return to the auto recording mode
Set the recording dial to
!
#
or
.
1
EN