Warning Indications - JVC GZ-X900 Manual De Instrucciones

Trouble
Something appears to
be shaking at the lens.
The SD card cannot
be removed from the
camera.
Cannot upload the file to
YouTube
™
Cannot export the file to
iTunes
®
To reset the camera when it does not operate normally

! Open the LCD monitor and turn off the camera using the POWER/DISP button before
detaching the battery pack.
# And remove the power supply (battery pack or AC adapter) from the camera, then reattach it.
$ Execute [FACTORY PRESET].

Warning Indications

Indication
SET DATE/TIME!
COMMUNICATING ERROR
CANNOT USE IN
VIDEO MODE
NOT FORMATTED
FORMAT ERROR!
DATA DELETION ERROR
MEMORY CARD ERROR!
RECORDING FAILURE
PLAYBACK FAILED
THIS CARD CANNOT BE
USED FOR RECORDING OR
EDITING ON THIS CAMERA
•
When OIS is turned on, shaking may be observed at the lens. This
is not a malfunction.
•
Push the SD card in a few more times.
•
You need your YouTube
Create your account.
•
Refer to "Q&A", "Latest Information", "Download Information", etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser software.
•
Refer to "Q&A", "Latest Information", "Download Information", etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser software.
•
Set the clock. After that, charge the internal battery for more than
24 hours by connecting to the AC adapter. If the message still
appears, consult your nearest JVC dealer.
•
Be sure to use JVC battery packs. (Files recorded with other
devices that support AVCHD cannot be played back on this
camera.)
•
Replace the SD card. (Files recorded with other devices that
support AVCHD cannot be played back on this camera.)
•
Select [OK] and select [YES] to perform formatting.
•
Check the operating procedure, and perform once again.
•
Turn off the camera, and turn it on again.
•
Perform formatting. (All data is deleted.)
•
Remove and re-insert the SD card. (MultiMediaCard cannot be
used.)
•
Remove any dirt from the SD card terminals.
•
Insert the SD card before switching the power on.
•
Turn off the camera, and turn it on again.
•
Remove and re-insert the SD card. (MultiMediaCard cannot be
used.)
•
Remove any dirt from the SD card terminals.
•
Insert the SD card before switching the power on.
•
When you attempt to perform editing on the inserted SD
card that has been used for recording on cameras from other
manufacturers.
Action
account to upload files to YouTube
™
Action
.
™

EN