1. Keep 45° place of the circular cone clean away from copper dust after using (Fig. 7).
2. Apply lubricating grease to all threaded parts on the yoke.
3. Apply lubricated grease to the bearing located under the flaring cone mechanism.
circular cone
FTX800B410
R-410A bar: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 inch
FTX800BA
Standard imperial bar: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 inch
FTX800BM
Standard metric bar: 6, 8, 10, 12, 15, 16 and 18 millimeter
FTX800R
3/8" sq. drive ratchet
FTX800Y
Yoke assembly.
Ruby Industrial Complex #06-10, Genting Block 80 Genting Lane
MAINTENANCE INSTRUCTIONS
brush
SPARE PARTS
CPS PRODUCTS, INC.
1010 East 31st Street, Hialeah, Florida 33013, USA,
Tel: 305-687-4121; 1-800-277-3808, Fax: 305-687-3743
www.cpsproducts.com. e-mail: cpssales@cpsproducts.com
4605 Crysler Ave. Niagara Falls, Ontario L2E 3V6
Phone - 905-358-3124; Fax - 905-358-7187
Toll Free - 1-866-629-3895; e-Mail: cpscanada@bellnet.ca
CPS PRODUCTS N.V
Krijgsbaan 241, 2070 Zwijndrecht, Belgium
Tel: (323) 281 30 40; Fax: (323) 281 65 83
CPS AUSTRALIA PTY. LTD.
109 Welland Avenue, Welland, South Australia 5007
Tel: +61 8 8340 7055, Fax: +61 8 8340 7033
e-mail: sales@cpsaustralia.com.au
Tel: (65) 8461056, Fax: (65) 8461054
e-mail: cpsasia@singnet.com.sg
CPS CANADA
CPS ASIA
Singapore 349565
FT800OM